hycarbide@gmail.com Tel:+86-731-22761686
Tungsten carbide rods factory,carbide flats,carbide inserts,customized TC products manufacturer–Hengyuan Carbide
en
Carbide rods with one coolant hole
  • Carbide rods with one coolant hole
  • Carbide rods with one coolant hole

Carbide rods with one coolant hole

Carbide rods with one coolant hole

 

 

Carbide rods with one coolant hole

 

Carbide rods with one coolant hole

HIP Sintered Furnace

Carbide rods with one coolant hole

Grade:YL10.2  K20/K30

  • Density:14.3-14.4g/m3
  • T.R.S:>=3500~3800N/mm2
  • Harness:91.5~92.0 HRA
  • Metalgraphy:A02B00C00  Grain size:0.8um
  • This grade work at 45hrc materials.It’s used for making drill and endmill, suitable for cutting general steel(HRC<48),Grey cast iron,stainless steel and heat resistant alloy.

 

Grade:KU12 K30/K40

  • Density:14.1-14.2g/m3
  • T.R.S:>=3800~4000N/mm2
  • Harness:92~92.5 HRA
  • Metalgraphy:A02B00C00  Grain size:0.6um
  • This grade work at 55hrc materials.Ultrafine grain size, high cobalt, good hardness and toughness, used for making endmilland reamer, especially suitable for cutting steel(HRC:45-55), aluminum alloy and titanium alloy.

 

Grade:KU25A   K30/K40

  • Density:14.05g/m3
  • T.R.S:4200N/mm2
  • Harness:92.6 HRA
  • Metalgraphy:A02B00C00  Grain size:0.4um
  • High-speed cutting, medium-speed feed, suitable for processing glass fiber materials, carbon steel, stainless steel, nickel-based alloys, quenched steel, titanium-based alloys, composite materials, etc.

 

Grade:KU09  K05/K20

  • Density:14.4g/m3
  • T.R.S:4000N/mm2
  • Harness:93.5 HRA
  • Metalgraphy:A02B00C00  Grain size:0.3um
  • Extremely high wear resistance and strength, suitable for high-hard materials (HRC55 and above) finishing,high-gloss surface treatment of aluminum alloy, titanium alloy, stainless steel, high-temperature alloy and other difficult-to-machine materials (composite wood).

 

Grade:KU06  K05/K10

  • Density:14.7g/m3
  • T.R.S:3800N/mm2
  • Harness:94.1 HRA
  • Metalgraphy:A02B00C00  Grain size:0.4um
  • Ultra-fine grains, suitable for making end mills and engraving cutters with high wear resistance requirements, suitable for processing PCB materials and high-hardness aluminum alloys.

 

Sizes for carbide rods with central coolant holes

TypeD
(mm)
Tol.
(mm)
d
(mm)
Tol.
(mm)
L
(mm)
Tol.
(mm)
D4.5*d0.8*3304.5+0.25/0.500.8±0.15310/3300/+5.0
D6.0*d1.0*3306.0+0.25/0.501.0±0.15310/3300/+5.0
D6.0*d1.5*3306.0+0.25/0.501.5±0.20310/3300/+5.0
D7.0*d1.5*3307.0+0.25/0.501.5±0.15310/3300/+5.0
D8.0*d1.0*3308.0+0.25/0.501.0±0.15310/3300/+5.0
D8.0*d2.0*3308.0+0.25/0.502.0±0.20310/3300/+5.0
D8.5*d1.5*3308.5+0.25/0.501.5±0.15310/3300/+5.0
D9.0*d2.0*3309.0+0.25/0.502.0±0.20310/3300/+5.0
D10.0*d2.0*33010.0+0.25/0.502.0±0.20310/3300/+5.0
D10.0*d3.0*33010.0+0.25/0.503.0±0.25310/3300/+5.0
D11.0*d3.0*33011.0+0.25/0.503.0±0.25310/3300/+5.0
D12.0*d2.0*33012.0+0.25/0.502.0±0.20310/3300/+5.0
D12.0*d3.0*33012.0+0.25/0.503.0±0.25310/3300/+5.0
D13.0*d2.0*33013.0+0.25/0.552.0±0.20310/3300/+5.0
D14.0*d3.0*33014.0+0.25/0.553.0±0.25310/3300/+5.0
D16.0*d3.0*33016.0+0.25/0.553.0±0.25310/3300/+5.0
D16.0*d4.0*33016.0+0.25/0.554.0±0.30310/3300/+5.0
D18.0*d3.0*33018.0+0.25/0.603.0±0.25310/3300/+5.0
D20.0*d4.0*33020.0+0.25/0.604.0±0.30310/3300/+5.0
D22.0*d3.0*33022.0+0.30/0.803.0±0.25310/3300/+5.0
D24.0*d4.0*33024.0+0.30/0.804.0±0.30310/3300/+5.0
D26.0*d4.0*33026.0+0.30/0.804.0±0.30310/3300/+5.0
D28.0*d4.0*33028.0+0.30/0.804.0±0.30310/3300/+5.0
D30.0*d5.0*33030.0+0.30/0.805.0±0.30310/3300/+5.0
Grade Chart
GradeGrain
um
Cobalt
%
Density
g/cm3
Hardness
HRA
T.R.S
N/mm3
Application
YL10.20.810-10.214.3-14.491.5-92.03500-3800This grade work at 45 hrc materials.It's used for making drill endmils,suitable for cutting general steel(HRC<48),Grey cast iron,stainless steel and heat resistant alloy.
KU120.610-1214.1-14.292-92.53800-4000This grade work at 55 hrc materials.Ultrafine grain size,high cobalt,good hardness and toughness,used for making endill and reamer,espeially suitable for cutting steel(HRC:45-55),aluminum alloy and titanium.
KU25A0.41214.0592.64200High-speed cutting, medium-speed feed, suitable for processing glass fiber materials, carbon steel, stainless steel, nickel-based alloys, quenched steel, titanium-based alloys, composite materials, etc.
KU200.71014.491.94100Medium speed processing, strong versatility, suitable to process carbon steel, alloy steel, stainless steel, nickel-based alloy, titanium alloy, heat-resistant alloy steel, cast iron, etc.
KU20A0.61014.492.24100 Medium speed processing, strong versatility, suitable to process carbon steel, alloy steel, stainless steel, nickel-based alloy, titanium alloy, heat-resistant alloy steel, cast iron, etc.
KU090.3914.493.54000Extremely high wear resistance and strength, suitable for high-hard materials (HRC55 and above) finishing,high-gloss surface treatment of aluminum alloy, titanium alloy, stainless steel, high-temperature alloy and other difficult-to-machine materials (composite wood) .
KU060.4614.794.13800Ultra-fine grains,suitable for making end mills and engraving cutters with high wear resistance requirements, suitable for processing PCB materials and high-hardness aluminum alloys.
KU15---1513.96894500Good wear resistance and excellent toughness, suitable for making stamping dies,anti-vibration boring bar, etc.
 

Contact:Mr.Steven

Email:zzhycarbide@gmail.com

Mob/Whatsapp:0086-136 2733 6101



Leave a Message