hycarbide@gmail.com Tel:+86-731-22761686
Tungsten carbide rods factory,carbide flats,carbide inserts,customized TC products manufacturer–Hengyuan Carbide
en
carbide drawing dies
  • carbide drawing dies
  • precision carbide drawing dies

carbide tube drawing dies

carbide tube drawing dies

 

  • high compressive strength, excellent wear resistance, good thermal conductivity
  • close tolerance, high precision, long service life, high surface quality for drawn materials
  • simple production, low cost, cost-effective application for drawn wire, bar, tube
  • a large range of sizes, several grades for tungsten carbide dies nibs
  • standard and shaped carbide dies available, supply carbide drawing dies with steel cases and without cases

 
Carbide tube drawing dies is a metalworking process used to reduce the cross section of ferrous and non-ferrous metal tubes. Tube, or pipe, drawing dies can be round, square, octagonal as well as any custom shapes desired. These dies are used for tube drawing such as copper, aluminum, steel, brass and copper alloys with a satisfactory surface finish. We also manufacture carbide floating plugs, carbide mandrels used to maintain the inner diameter of the pipe or tube.
 
The grade for cemented carbide drawing pellet

GradeDensity
g/cm3
Hardness
HRA
T.R.S
N/mm3
Application
YG3X15.1921300For drawing steel wire, non-ferrous, and alloy wires with less than diameter 2mm.
YG6X14.9591.51800For drawing steel wire, non-ferrous wires and bars with less than diameter 6mm.
YG614.9590.51900For drawing steel wire and non-ferrous alloy bars of less than diameter 20mm, and drawing tubes of less than diameter 10mm.
YG814.889.52200For drawing steel, non-ferrous metal, and alloy bar&tube, it can also be used for machinery parts, tools, and wear parts.
YG1014.588.52400For drawing steel rods,tupe&pipe with a high compression rate.
YG1514872800For drawing steel rods,tupe&pipe with a high compression rate.

The sizes for tube drawing dies

TypeD
(mm)
H
(mm)
Hole range
d(mm)
TypeD
(mm)
H
(mm)
Hole range
d(mm)
S20382817.5-18.5S23503220.0-24.0
S20402521.5S23603526.0-30.0
S20452825.5-26.5S23704232.0-36.0
S20503027.5-30.5S23754238.0-40.0
S21503520.0-24.0S23854542.0-46.0
S21604526.0-30.0S231005048.0-54.0
S21704532.0-40.0S231105056.0-62.0
S21804542.0-46.0S231255564.0-70.0
S21904548.0-54.0S3023.51612
S211004558.0-62.0S3024.5,25.51614
S2220132.8-5.7S3025.5,27.51614
S2230186.7-11.5S3028-36.42717
S22452412.5-23.5S3037-39.42719
S22502524.5-30.5S3040-432721
S22603024.0-33.5S3044-463223
S22653234.5-39.5S3047-533225
S22703534.5-35.5S3054-573228
S22753540.5-42.5S3058-643528
S22803534.5-47S3114-16257
S22854047.5S3117-18258
S22904046-53S3119-223010
S221004055-57S3123-273012
S221204559-67.0S3128-423516-20
S221305069-77S3143-444022
S221405079-88S3145-504526.4

 



Leave a Message
Your Install Code Please copy and paste the code below in your site's HTML (preferably as close as possible to the open tag but anywhere will work) and you'll be set. Back to Dashboard I need help